Dell 3115cn Color Laser Printer - Manual (Page 322)

Inserting a Pause
For some telephone systems, it is necessary to dial an access code and listen for a second dial tone. A pause
must be entered in order for the access code to function. For example, enter the access code 9 and then
press Pause before entering the telephone number. "-" appears on the display to indicate when a pause is
entered.
Setting the Time and Date
NOTE: It may be necessary to reset the correct time and date if loss of power to the multifunction
printer occurs.
To set the time and date:
Press until >SETUP appears, and then press . 1.
Press until >Admin Menu appears, and then press . 2.
Press until >System Settings appears, and then press . 3.
Press until >Clock Settings appears, and then press . 4.
Press until >Set Date appears, and then press . 5.
Enter the correct date using the number keypad. 6.
NOTE: If you make a mistake while entering numbers, press to reenter the digit.
Press when the date on the display is correct. 7.
Press until >Set Time appears, and then press . 8.
Enter the correct time using the number keypad. 9.
Press when the time on the display is correct. 10.
Press Cancel to return to the standby mode. 11.
NOTE: The multifunction printer beeps and does not allow you to proceed to the next step if a wrong
number is entered.
Changing the Clock Mode
1.