Cisco IP/TV 3400 Series - Manual (Page 54)

Chapter 1 Introducing IP/TV Servers
Partition Configuration
1-28
Cisco IP/TV 3400 Series Servers User Guide
OL-4467-01
Partition Configuration
The hard disk of the Cisco IP/TV 3400 Series Server contains three partitions. The
first partition of 2 GB contains the operating system. The second partition is the
data partition. The third partition of 1 GB contains the image used to reboot the
system in the event of a system failure.
The Cisco IP/TV 3426, 3427-C1, 3427-C2, and 3427-C3 Broadcast Servers have
only two partitions. The first partition of 2 GB contains the operating system. The
second partition is the data partition.
IP/TV Program Manager
IP/TV Program Manager is a Linux-based application running on Cisco
Content Engine hardware models CE-565 and CE-7305. Refer to the Cisco
Content Engine 510 and 565 Hardware Installation Guide and the Cisco Content
Engine 7305 and 7325 Hardware Installation Guide for detailed instructions on
installing the Content Engine hardware.
In IP/TV Release 5.1, IP/TV Program Manager is a device mode of the Cisco
Content Engine. By default, a Content Engine is set to function as a Content
Engine. You can change the device mode of the Content Engine to IP/TV Program
Manager by entering the device mode program-manager global configuration
command. Refer to the Cisco ACNS Software Program Manager for IP/TV User
Guide Release 5.1 for detailed information on setting the CE-565 and CE-7305 to
function as IP/TV Program Manager.