Pro-Ject Audio Systems USB Box - Manual (Page 4)

© Audio Trade GmbH · Pro-Ject USB Box · Revision 15.10.10/15.12.10
4
Connecting to a Computer (Windows Vista ® operating system)
1. Connect the USB-output of the USB Box to a free USB-socket on your computer and
turn it on/make sure it is powered on.
Please note: Connection should be made to an USB-socket of your computer directly. Connecting to
USB-hubs or switches can cause problems.
2. The “new hardware found assistant“ will detect the unit and announces it as “Burr-Brown PCM2702”.
3. Open the Playback panel. Start Control Panel Hardware and Sound Sound Playback
In the Playback panel Burr-Brown PCM2702 (announced as Speakers) should be selected (usually preselected).
4. Click the OK button and close the control panel windows.