Rally Armor 2015+ Subaru Outback - Manual

IMF 34/36
Version 1.0 Release Date 10.27.2014
1
2015+ SUBARU LEGACY AND OUTBACK MUD FLAP INSTALLATION INSTRUCTIONS
PLEASE REVIEW THESE INSTRUCTIONS IN ITS ENTIRETY BEFORE ATTEMPTING INSTALLATION
For high resolution color images of these instructions, please visit http://www.rallyarmor.com
To protect your Rally Armor mud flaps, care must be taken during parking and reversing. Rally Armor always recommends professional installation.
Check wheel clearances after installation, especially on vehicles outfitted with non-OEM offset wheels and suspensions. Adjust accordingly.
Rally Armor is not responsible for damage or loss of installed mud flaps.
Each mud flap set contains 4 flaps, mounting hardware and brackets (unless otherwise noted).
Recommended tools: Philips Screwdriver, small & long flat head screwdrivers.
YOUR MOUNTING HARDWARE CONSISTS OF:
Quantity Hardware Item Item ID
2 Rear Brackets HMF14/16-BR-RE
2 Short Spacers .25sp
2 White Inserts Ins7
6 Flat Clips UClip
6 Polygon “Poly” Edge Clips PolCl
10 Stainless Steel Screws 1.5SS
4 Stainless Steel Screws 1SS
14 Washers SmWash
SCREW GUIDE FASTENER GUIDE
CAUTIONARY TIP: The hardware is strong and self-threading but over-tightening the mounting clips is not advised.
INSTALLATION TIP: To ease installation and avoid damage to existing OEM clips during removal, a well-lit, climate controlled installation environment is recommended.
TO THE INSTALLER: Please return these instructions to the customer after installation. Always test and check wheel clearances before returning vehicle.
TO THE CUSTOMER: Retain these instructions after installation. They may be necessary for installing other optional parts or removal of this accessory.