Canon 700 Series - Manual (Page 86)

Setting Up the Access Code Key 2-29
Using Speed Dialing
2
Setting Up the Access Code Key
Follow the procedure below to assign an access code (from two to five digits) to
represent a fax number. You can assign the access code key to [#] or any one-touch
speed dialing key. Also, you can set the number of characters used for an access
code.
1
Open all three one-touch speed dialing panels.
2
Press [Data Registration].
3
Press [ ▼ ] or [ ▲ ] until <3.FAX SETTINGS> appears
➞ press
[Set].
4
Press [ ▼ ] or [ ▲ ] until <7.SYSTEM SETTINGS> appears
➞ press
[Set].
If the prompt <SYSTEM SETTINGS PASSWORD> appears on the LCD display,
enter the system administrator’s password using the numeric keys
➞
press (Set).
➞
➞
Data
Registration
Set
Set
Set