Sony MDS-JE700 - Manual (Page 8)

Getting Started
Q' For precise time and date stamping of recordings
Reset the time at least once a week.
Note
If you disconnect the AC power cord for a long time, the
memorized settings will disappear, and "STANDBY" will
flash in the display the next time you plug in and turn on the
deck. If this happens, reset the clock.
Displaying the current date and time
You can display the time even when the deck is on or
in standby.
Press DATE PRESENT on the remote.
Each press of the button changes the display as
follows:
• Current display
—*■
Date —► Time —i
If you press the button once, the date and the time
appear sequentially for about 2 seconds each, then the
current display reappears.
In standby, you can press either DATE PRESENT on
the remote or SCROLL/CLOCK SET on the front panel
to display the time and the date as described above.
Changing the-date and/or time
1
With the deck in standby (POWER indicator
lights up red), press-SCROLL/CLOCK SET down
for about 2 seconds until the year indication in the
display starts flashing.
2
Press AMS repeatedly until the item you want to
change flashes.
3
Turn AMS to change the contents of the selected
item.
4
To complete the setting, press AMS.
8