Clarity D613C User Manual

D613c, Electric wall outlet (insert power adapter)

Advertising

X/clear/mute button (Mute/Clear/Delete/Answering Machine main menu):

(Idle mode): Press to access the main menu of the answer machine and listen to the voice

prompts.

(Pre-dial/Editing mode): Press once to delete a character or digit. Press and hold to delete all

characters/digits.

(During a call): Press this button to mute a call; press again to unmute call.

(Calls List/Phonebook entry): Press this button to delete the entry.

(Answering Machine mode): Press this button or the “0” key to delete the current message

playback.
phoneBooK button: Press this button to access the phonebook.

(Editing Mode): press to move the cursor to the left.

note: The phonebook will hold up to 30 name and numbers.

(End)/BacK button: Press to end a call.

(Menu Mode): Press to move back a menu level.

Dial pad/alphanumeric keypad: Enter the desired number you wish to call or characters

when typing a name into the phonebook entry. ( * button (Tone): During a call, press this button to
switch from pulse to tone dialing (temporarily). After the call has ended, the dial mode will resume
to pulse.) note: you can predial (dial before pressing Talk) or press Talk and dial after hearing the
dial tone.
#/pauSe/aBc/Format Button:
(Idle/Pre-dial/During a call mode): Press to insert a # symbol.
(In number editing mode): Press once to insert the # symbol; press and hold to insert a pause.
(In name editing mode): Toggle between ABC/Abc/abc
(In calls list entry): Press to toggle the Caller ID display format among 7, 8, 10 and 11 digits.
SpeaKer Button: Press the Speaker button to engage the speakerphone function; press again
to turn the feature off.
int. (intercom): It allows you to make internal calls, transfer external calls from one handset
to another and use the conference option. Press the INT. button to call another handset. Next, press
the number of the handset you wish to call, then press the MENU button to initiate the call.

(Talk)/FlaSh button: Press to make a call, answer an incoming call or to engage the Call

Waiting/Caller ID function (feature provided by local telephone company).
menu/holD/Select button: Press to access the menu list and to confi rm/save settings in
the menu.
(During a call): Press to place the call on hold.

top handset light: The light will ﬂ ash during an incoming call; the light will remain on when

you are on a call and the BOOST is on.

top handset light: The light will ﬂ ash during an incoming call; the light will remain on when

you are on a call and the BOOST is on.

BooSt on/off: press BOOST to engage the extra amplifi cation (screen brieﬂ y displays

BOOST ON). In BOOST OFF mode, the phone has a volume range of up to 16dB of amplifi cation.
In BOOST ON mode, the phone has a volume range of up to 30 dB of amplifi cation.

up: Scroll up/Volume up/call list:

(Idle mode): Press to access calls list.

(Menu Mode): Press to scroll up.

(Editing Mode): Press to move cursor to the left.

(During a call/Answering machine mode): Press to increase volume.

DoWn: Scroll down/Volume down/redial list:
(Idle Mode): Press to access the redial list. (up to 32 digits, up to 5 calls)
(Menu Mode): Press to scroll down.
(Editing Mode): Press to move cursor to the right.
(During a call/Answering Machine Mode): Press to decrease volume.
(Call List/phonebook/redial list entry): Press to scroll down the list.
FinD: Press to fi nd /page all registered handsets.
repeat (Backward): Press once to replay current message from the beginning. Press twice
to playback the previous message.
play/Stop: Press to play a message; press again to stop playing message.
charging light (Red): Light will turn on red when the handset is in the cradle base charging.
SKip (Forward): Press to skip a message and move forward to the next message.
anSWer moDe button: Press this button to toggle between the following answering
machine modes: ANSWER OFF; ANNOUNCE & RECORD; ANNOUNCE ONLY.
answering machine screen: See section on ICONS for details.
recorD announcement: Short press to play current outgoing message. Press and
hold to record your on outgoing message and release to stop recording.
Volume up/DoWn: Controls the answering machine volume (levels 0 to 8).
Delete: To delete message, press this button while message is playing; press and hold to
delete all reviewed messages. New messages cannot be deleted before being reviewed.

up: Scroll up/Volume up/call list:

(Idle mode): Press to access calls list.

(Menu Mode): Press to scroll up.

(Editing Mode): Press to move cursor to the left.

(During a call/Answering machine mode): Press to increase volume.

FinD: Press to fi nd /page all registered handsets.

play/Stop: Press to play a message; press again to stop playing message.

(Talk)/FlaSh button: Press to make a call, answer an incoming call or to engage the Call

Waiting/Caller ID function (feature provided by local telephone company).

Speakerphone is ON
Answering Machine is ON; blinks for new messages.
New calls are received; turns off after new calls are reviewed.
Ringer volume is turned off.
New voice mail, not yet listened to. (from your local
telephone company)
Level of charge in your battery; ﬂ ashes when it needs
recharging.

1. Connect one end of the telephone cord into the LINE port on the bottom of the main base;
connect the other end of the phone cord into our wall telephone outlet. See Figure 1.
2. Connect the DC adapter cord into the DC 6V 600mA port on the bottom of the main base;
plug the adapter into your wall outlet. See Figure 1.
3. Connect the DC adapter cord into the DC 6V 300mA port on the bottom of the charger;
plug the adapter into your wall outlet. See Figure 1.
4. Slide open the battery compartment door and connect the rechargeable battery into the
battery compartment. See Figure 2.
5. Put the handset on the base to charge for at least 24 hours before fi rst use. Subsequent
charging time should be 6-8 hours a day.

menu optionS

Dial pad/alphanumeric keypad: Enter the desired number you wish to call or characters

SKip (Forward): Press to skip a message and move forward to the next message.

answering machine screen: See section on ICONS for details.

inStalling your D613c

uSer guiDe

Amplifi ed Cordless DECT

Telephone with CID/

Digital Answer Machine and

Expandable Handset

Clarity, a Division of Plantronics, Inc.

4289 Bonny Oaks Drive, Suite 106
Chattanooga, TN 37406
1-800-426-3738

www.clarityproducts.com

© 2009 Clarity, a division of Plantronics, Inc. All rights reserved. Amplifying your life, Clarity,
the amplifi cation device, Clarity and the amplifi cation device combined, Clarity, D613C, Clarity
Power are trademarks or registered trademarks of Plantronics, Inc.
Rev. F (9-09)

contentS & partS checKliSt

Feature liSt anD oVerVieW

User guide

Handset 2

DC adapter

Main Base

6V 600mA

Main Base

Your package includes all the items as shown here. If there is anything missing, please
contact our Customer Care Department immediately.
note: PLEASE RETAIN A COPY OF PROOF OF PURCHASE FOR YOUR RECORDS.

Screen on Base
The following symbols will appear on the base LCD screen to indicate the following:

- - : Will be displayed when the answer machine is turned off.

00 : Indicates no new messages.

09 : Indicates how many messages are on the answering machine. (Example: There are 9

answering machine messages in total.) Symbol will ﬂ ash when you play a message.

f : Will ﬂ ash when the answering machine memory is full. note: The answering machine

will hold up to 15 minutes of recorded messages with a limit of 59 messages.

LA/09: Symbols will blink back and forth when recording a personalized announcement or

memo. The numbers (example: 09) indicate the total number of messages in answering machine
when playing announcement.
in Flashing mode: Answering an incoming call / recording an incoming call.

: Represents announce only mode.

: Line remote access is in progress.

LA/09

: Symbol will blink back and forth when remote access is in progress. The number

indicates the total number of new messages.

: Indicates the base speaker volume level. (Example: Volume level is set at level 3.

(Note: The speaker level symbol will disappear after three seconds.)

Battery performance
The battery icon will blink on the menu screen when the battery is low. A fully charged battery
will provide an estimated 10 hours of talk time and 100 hours of standby time.

To keep your battery pack in the best condition, leave the handset off the base for a few hours
at a time. Running the battery pack down at least once will help it last as long as possible. The
charge capacity of rechargeable battery pack will reduce with time as it wears out, giving the
handset less talk/standby time. Eventually it will need to be replaced.
note: Battery pack and handset may become warm during charging. This is normal.

Telephone line

cord

2 x

Battery

pack

There are six main menu options on the D613C handsets: Date & Time, Phonebook, Setup HS,
Setup BS, Answer Machine and Reset Settings.
To navigate through the menu:
1. Press the MENU button;
2. Press the UP/DOWN arrow buttons to scroll through the menu;
3. Press the MENU button to open a sub menu or to select an option. Press the (Talk Off)/BACK
button to go back to the previous menu level or to cancel an action.
note: If you do not press any button on the handset for 30 seconds the display will automatically
return to standby.

menu Screen on

handset

14
15

17
18
19

20
21

Electric Wall Outlet

(insert power adapter)

Telephone Wall Outlet

(insert phone cord)

Figure 1

Figure 2

D613C

Boost Function - amplify incoming Sounds

1. While on a call, press the BOOST button to engage the amplifi er. The D613C has a
BOOST button that controls the loudness of the receiver. Once the BOOST button is
pressed, an extra level of amplifi cation is added over the entire range of the Volume Control.
During a call, the BOOST button can toggle the Clarity Power function On or Off according
to the user’s needs. The BOOST button will reset automatically every time the phone is hung
up for at least 5 seconds. The top light will illuminate (Red) while the BOOST function is
activated.

2. During a call, press UP/DOWN buttons to adjust the volume to the desired sound level
(up to 30 dB of amplifi cation) on the earpiece or loudspeaker. The Volume Control adjusts
the level of volume in the handset and speaker in both BOOST or non-BOOST modes. The
volume control provides up to 16 dB of volume before the BOOST button is activated.

BooSt Function anD

Volume control

main

menu

Date &

time

phone-

book

Setup hS

Setup

answering

machine

reset

Setting

Sub
menu

Year
Date
Time

View
Add
Edit
Delete
Delete All
PB Capacity
Speed Dial

Ringer Tone
Ringer Volume
Key Tone
Low Batt Tone
Out Range
Tone
Handset Name
Language
LCD Contrast

Ringer
Tone
Ringer
Volume
Dial Mode
Area
Code

Answering
Machine
Message Alert
Number of
Rings
Announcement
Record Memo
Call Screening
Remote Access
Security Code

CLR Voice
Mail
All Set-
tings

Warning: Volume may Be louD.

proceeD With care.

aDDitional hanDSetS

registering additional handsets
The original handsets are pre-registered for use. Up to 5 handsets can be registered to one base
station. Additional handsets must be registered to the base before you can use them.
1. Place the unregistered handset on the charger.
2. Press and hold the FIND button for 4 seconds on the base.
3. Release the FIND button once the IN USE light starts to ﬂ ash.
4. A confi rmation tone will sound when registration is successful. Handset X is displayed where X
denotes the number of handsets. The phone will then go back to idle.
De-register all handsets
1. Unplug the power from the base.
2. Press and hold the FIND button on the base for 10 seconds.
3. Plug back in the power of the base.
4. Release once the IN USE light starts to ﬂ ash rapidly.
5. Within 2 seconds, press and release the FIND button on the base again. This will de-register all
handsets. The IN USE light on the base will be OFF and NOT REGISTERED will display on each
handset menu screen.

call liSt (ciD)

menu optionS

Setup BS (Base) (Main Menu)
Submenu settings allows you to select your personalized settings for the base: Ringer Tone
(Melody settings 1-3), Ringer Volume (1-5), Dial Mode and Area code.
answering machine (Main Menu)
Submenu settings allows you to set the following: Answering Machine (Answer Off/Announce
& Record/Announce Only), Message Alert (On/Off), Set Number of Rings before the Answer
Machine picks up, Announcement (Announce & Record/Announce Only), Record Memo, Call
Screening, Remote Access (On/Off) and set your own security code for remote access (default
security code is 123). NOTE: tam = telephone answering machine.
reset Setting (Main Menu)
Submenu settings allows you to Clear your Voice Mail (service provided by your local
telephone company) or to reset All Settings to the default settings.
Date and time (Main Menu)
The submenu will allow you to manually input the Year, Date and Time. If you have CID
service (service provided by your local telephone company), this information will automatically
register during your fi rst call.
phonebook (Main Menu)
Submenu settings allows the following options: View, Add, Edit, Delete, Delete All, Check your
Phonebook Capacity and Set your Speed Dial for keys 1-9.
Setup hS (Handset) (Main Menu)
Submenu settings allows you to select your own personalized settings for the handset: Ringer
Tone (Melody settings 1-3), Ringer Volume (Off, Vol. 1-5), Key Tone (On/Off), Low Batt Tone
(On/Off), Out of Range (On/Off), Tone, Handset Name and Language (English/FRANÇAIS/
Español).

reSet SettingS

reset all Settings
This will reset all the personalized settings to the default settings.
note: All entries in the Phonebook, Redial List and Call List will be cleared.
1. Press the MENU button and use the UP/DOWN buttons to select Reset Settings.
2. Next, press the MENU button and use the UP/DOWN buttons to select All Settings.
3. Press the MENU button to select Yes.

Screen iconS (hanDSet anD BaSe)

Volume up/DoWn: Controls the answering machine volume (levels 0 to 8).

Handset 1

Charger

Electric Wall Outlet

(insert power adapter)

DC adapter

Charger

6V 300mA

Main Base

Charger

This is a service provided through your local telephone company. The D613C will
automatically display the incoming callers name and number along with the date and time for
the call. It will record up to 30 calls.
note: The time and date will automatically register after receiving your fi rst call.
call list (ciD)
The call list contains the missed and received calls. Entries are displayed in chronological order
with the most recent call at the top of the list. When there is a missed call that has not been
answered, NEW will be displayed on the menu screen.
note: When the call list is full, a new call replaces the oldest in the list. If you receive more
than one call from the same number, only the most recent call is kept in the call list.
View call list
To View the Call List information press the UP button while your phone is in idle mode, the
most recent number will be displayed. Press the UP/DOWN buttons to scroll through the call
list.
Formatting call list information
When reviewing an entry from the call list, press the # button repeatedly to display the
number in different formats. For example, if the call number is displayed as 800-426-3738, the
various formats will be: 426-3738, 1-426-3738, 800-426-3738 and 1-800-426-3738.
Save number from call list to phonebook
1. Use the UP/DOWN buttons to scroll to the CID entry you would like to save.
2. Press the MENU button and enter the name, using your dial pad.
3. Press the MENU button once again to edit the number.
4. Press the MENU button to save to the Phonebook.
note: Up to 30 names and number can be stored into the phonebook. Numbers can be
stored up to 24 digits long and names can be up to 16 characters long. Entries will be stored
in alphabetical order.
Delete a call list entry
1. Press the UP button to enter the call list.
2. Press the UP/DOWN buttons to your desired entry.
3. Press the CLEAR/DELETE button to delete the entry.
Delete entire calls list
1. Press the UP button to enter the call list.
2. Press and hold the CLEAR/DELETE button until “DELETE ALL CALL LOG ENTRIES?” is
displayed.
3. Press the MENU to confi rm and delete all entries.

User guide

D613C™

pleaSe reFer to the SaFety inStructionS

SectionS For important proDuct SaFety

inFormation prior to inStallation or uSe oF

the proDuct.

Advertising