Sony MZ-R55 - Manual (Page 22)

Adding a track mark Erasing a track mark
You can add track marks so that the part
after the new track mark is counted as a
new track.
The track numbers will increase as
follows.
3 4
r Track markinc
3
4 5
Track numbers increase
I While playing or pausing an MD,
press T MARK on the recorder at the
point you want to mark.
“MARK ON” appears in the display,
and a track mark is added. The track
number will increase by one.
To add track marks while
recording
Press T MARK on the recorder or TRACK
MARK on the remote control.
Note
TRACK MARK on the remote control does
not function during playback.
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark. The track
numbers will change as follows.
4
..........
*r
........
Erase a trad mark
L
j
_
3
Track numbers decrease
I I
mark you want to erase, press II to
pause.
Find the track mark by pressing I
slightly.
For example, to erase the third track
mark, find the beginning of the third
track. “00:00” appears in the display.
Press T MARK to erase the mark.
“MARK OFF” appears in the display.
The track mark is erased and the two
tracks are combined.
V'
When you erase a track mark, the date, time,
and name assigned to the mark are also
erased.
22