Sony DVP-S300 - Manual (Page 7)

Getting Started
What cords will I need?
Audio/Video connecting cord (supplied) (1)
Yellow
White (L)
Red (R)
S-link
Yellow
White (L)
Red (R)
S-link
Hookups
when connecting the cords, be sure to match the color-
coded cord to the appropriate jacks on the components:
Yellow (video) to Yellow, Red (right) to Red and White
(left) to White. Be sure to make connections firmly to
avoid hum and noise.
■To listen to the sound through TV speakers
TV
CD/DVD player
-L VIDE01
R-AUDIO 2 L VIDEO 2
LINE OUT
ITo listen to the sound through speakers connected to
an amplifier
TV
Make the same connections when your amplifier conforms
to "Pro Logic."
Notes
• Do not connect this
player to a video deck.
If you view the pictures
on your TV after
making the connections
shown on the right, a
picture noise may
appear. Video deck
CD/DVD
player
0
J
Connect
directly
• Depending on the TV or amplifier, sound distortion may
occur because the audio output level is high. In this case,
set "AUDIO ATT" in "INITIAL SETUP 2" to "ON" in the
setup display. For details, see page 35.
y If your TV has an S video input connector
Connect the component via the S VIDEO OUT connector
using the S video cable (supplied) instead of the video
connecting cord. You will get a better picture.
S video cable (supplied)
^ c::;)
CD/DVD player TV
'Q' If you have a digital component such as an amplifier
with a digital connector, DAT or MD
Connect the component via the DIGITAL OUT OPTICAL
or COAXIAL connector using an optical or coaxial digital
connecting cord (not supplied).
When you play a DVD, set "DIGITAL OUT" in "INITIAL
SETUP 2" to "PCM" in the setup display, (page 35)
■When using an optical digital connectiong cord
Optical digital connectiong cord
■03----------------------------- cO>
(not supplied)
Take off the cap and plug in the optical digital
connectiong cord.
CD/DVD player
Amplifier with a
digital connector, MD
deck, DAT deck, etc.
(Continued)
JEN