Sony STR-DA333ES - Manual (Page 22)

Location of
Parts and Basic
Operations
This chapter provides information
about the locations and functions of
the buttons and controls on the front
panel. It also explains basic
operations.
Front Panel Parts
Description
Q] l/(!) switch
Press to turn tlte receiver on and oft.
• Before \'ou turn on the reeei\ or, make sure that \’ou have
turned the MASTHR X'OLUMK control to the lettmost
position to a\'oid damaging vour speakers.
[U FUNCTION control
Rotate to select the component you want to use.
To select Rotate to light
VCR VIDEO 1 or VIDEO 2
Camcorder or \ ideo game VIDEO 3
TV or satellite tuner TV/SAT
DVD or LD player DVD/LD
Tape deck TAPE
MD or DAT deck MD/DAT
CD player CD
Built in tuner TUNER
Turntable PHONO
After selecting the component, turn on the component
you selected and play the program source.
• After selecting VCR, camcorder, video game, DVD player,
or LD player, turn on the TV and set the TV's video input
to match the component you selected.
• When using digital inputs, there may be up to 6 seconds of
silence when switching functions or inserting new discs.
MODE button
Press to select and play another video/audio source in
combination with the selected component.
Each time you press the button, the display changes as
follows:
I—► V:XXX —► A:XXX —► selected component
Press MODE to display And rotate FUNCTION to select
V:XXX Any video source to enjoy with
the audio from the selected
component
A;XXX Any audio source to enjoy with
the video from the selected
component
• When the 5.1CH INPUT
( 0 4 1 )
is selected, the display
changes as follows.
|—* ViXXX -► 5.1CH INPUT-|
2 2
Function indicators
Normally, the indicator above the selected function lights
orange. However, when MODE is used to select a different
video (V:XXX) or audio (A:XXX) source, the video function
lights green and the audio function lights orange. This also
occurs when you select audio components (like PHONO).