Sony STR-DE135 - Manual (Page 9)

Receiver Operations
Press one of the FUNCTION buttons to select the
component you want to use.
The FUNCTION buttons on the remote are
factory-set as follows:
To listen to or watch Press
Radio programs TUNER
Compact discs (CD) CD
MiniDiscs (MD) or
audio tapes MD/TAPE
(INITIAL-MD MODE)
TV programs TV
VHS Video tap>es
(VTR-3 mode) VIDEO
The receiver and the selected component turn on.
If the component does not turn on
Press the power switch on the component.
Start playing.
Refer to "Remote Button Descriptions" on page
16 for details.
To turn off the components
Press l/C!). You can turn off the video and audio
components connected to the SWITCHED AC OUTLET at
the same time.
Receiving Broadcasts
This receiver lets you enter a station's frequency
directly by using the numeric buttons (direct tuning). If
you don't know the frequency of the station you want,
see "Receiving broadcasts by scanning stations
(automatic tuning)" on page 10.
Before you begin, make sure you have:
• Connected an FM or AM antenna to the receiver as
indicated on page 5.
• Selected the appropriate speaker system. (See
"Selecting the speaker system" on page 7.)
Numeric
buttons
1
Press I / (!) (power) to turn on the receiver.
2 Press TUNER.
The last received station is tuned in.
3
Press FM or AM to select FM or AM stations.
4
Press DIRECT.
5 Press the numeric buttons to enter the frequency.
Example 1: FM 102.50 MHz
b b b b b
Example 2: AM 1350 kHz
(10 kHz interval) (9 kHz interval)
1 3 _5_ 13 5 0
□□□ cziacua
b b b b b b b
when you tune in AM stations, adjust the
direction of the AM loop antenna for optimum
reception.
(continued)