Sony STR-DE915 - Manual (Page 27)

Sound Adjustment
usting the equalizer parameters
{-DE915 only)
ist the equcilization (bass or treble) of the front,
;r and rear speakers for optimum sound,
following adjustments effect all sound fields
iltaneously.
While playing a component, press DPC MODE
repeatedly until the EQ indicator lights up.
Use the digital processing control buttons ( A /
V ) to select the parameter to be set and use the
buttons ( < / > ■ ) to select the setting.
To set Select And set between
bass level of the
front speakers
F: BASS -lO.OdB and +10.0dB
(in 0.5 dB steps)
bass frequency of
the front speakers F:BASS 99Hz and 992Hz (in
21 levels)
treble level of the
front speakers F: TREBLE -lO.OdB and +10.0dB
(in 0.5 dB steps)
treble frequency of
the front speakers F: TREBLE l.OkHz and 8.6kHz
(in 21 levels)
bass level of the
center speaker C; BASS -lO.OdB and +10.0dB
(in 0.5 dB steps)
bass frequency of
the center speaker OBASS 99Hz and 992Hz (in
21 levels)
treble level of the
center speaker C: TREBLE -lO.OdB and +10.0dB
(in 0.5 dB steps)
treble frequency of
the center speaker C: TREBLE l.OkHz and 8.6kHz
(in 21 levels)
bass level of the rear
speakers R; BASS -lO.OdB and +10.0dB
(in 0.5 dB steps)
bass frequency of
the rear speakers R:BASS 99Hz and 992Hz (in
21 levels)
treble level of the
rear speakers R: TREBLE -lO.OdB and +10.0dB
(in 0.5 dB steps)
treble frequency of
the rear speakers R: TREBLE l.OkHz and 8.6kHz
(in 21 levels)
Repeat Step 2 if necessary.
You can turn off the equalizer adjustments without
erasing them [X]
press EQ/TONE on the remote. ^
Adjusting the tone parameter (STR-DE715/
DE615/0660Z/0560Z only)
Adjust the tone (bass or treble) of the front, center and
rear speakers for optimum sound. You can adjust the
tone of all sounds fields, including Dolby Surround.
1 Press DPC MODE repeatedly until the TONE
indicator lights up.
2 Use the digital processing control buttons ( Д /
V ) to select BASS or TREBLE.
3 Use the digital processing control buttons ( < /
]> ) to adjust the tone level.
The adjusted tone level is stored automatically.
*9’ You can turn off the tone adjustments without
erasing them
The lone adjustments and on/off setting are stored
separately for each sound field. Press DPC MODE
repeatedly to turn off the TONE indicator.
Adjusting the delay time (STR-DE715/
DE615/D660Z/D560Z only)
You can make the surround sound more effective by
delaying the output from the rear speakers (delay
time). You can select a delay time of 15, 20, and 30 ms.
Set a short delay time when the rear speakers eue
located in a leirge room or far from your listening
position.
1 Start playing a program source encoded with
Dolby surround sound.
2 Press DPC MODE repeatedly until the SUR
indicator lights up.
3 Use the digital processing control buttons ( A /
V ) to select the delay time.
The current delay time appears in the display.
4 Use the digital processing control buttons ( < /
> ) to adjust the delay time.
may hear some noise as you adjust the parameters.
27