0 50 q, 0 100 c3, To exit the osd – Sony CPD-120VS User Manual
Page 22: Adjusting the pincushion
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Advertising
Adjusting the pincushion
The adjustment data becomes the individual setting for each input signal
received.
1. Press the Q button.
The GEOMETRY OSD appears.
o
o
GEOMETRY
0
50 Q
2. Press the 3 +/- buttons.
+ to expand the picture sides
^ 3 4
o
I
0
100
C3
- to diminish the picture sides
♦
3 4
To exit the OSD
Press the O button again.
Tip
If you don't touch any buttons, the OSD automatically disappears after 10 seconds.
When you want to adjust another item, press the button of the item. The OSD of the selected
item appears.
-
22 Adjustments
Advertising