Sony LBT-D570 - Manual (Page 21)

To change the equalizer display
Each time you hold down DISPLAY /
DEMO for a few seconds, the equalizer
display changes to show one of the
following displays:
Spectrum analyzer 1
125 2S0 500 Ik 2k * ak 1»
Spectrum analyzer 2
63 125 250 500 1k 2k « a> tehiw
Spectrum analyzer 3
125 250 500 Ik a> * 6k ISuw
Graphic equalizer curve
125 250 500 Ik 2k 4k 6k I6k(№|
J Press one of ►, A or T (CURSOR
CONTROL).
The frequency range appears and the
level value flashes in the display.
2
Press ◄ or ► to select the frequency
range you want to change.
Frequency range
t
^ d . . .
C l d B
^-------------
Level value
Press A or T to raise or lower the level
of the frequency range.
flashing
flashing
4
Repeat steps 2 and 3 to adjust other
frequency ranges and press ENTER/
NEXT.
Activating the Sound Field
(Surround)
To turn on the surround effect
Press SURROUND.
"SUR ||IH■lll|) " appears in the display.
To turn off the surround effect
Press SURROUND so that "SUR ||ll•■lll|| "
disappears from the display.
Notes
• When you choose other sound effects, the
surround effects will be canceled.
• To retain the adjusted soimd effect for
future use, store it into a personal file (see
"Making a Personal Audio Emphasis File
(personal file)").
Adjusting the Audio
Emphasis
You can adjust the audio emphasis using
the following two functions:
• Graphic equalizer
• Surround effect
Adjusting the Sound
(graphic equalizer)
This feature lets you adjust the audio
emphasis by raising and lowering the level
of frequency ranges. Before operation, first
select the emphasis you want for your basic
sound.
You can use the surround effect without
connecting the surround speakers. Before
operation, first select the audio emphasis
you want for your basic soimd.
■SURROUND
Chapter 5: Sound Adjustment I 2 ^