Know your high pressyre washer – Craftsman 919.762500 User Manual
Page 8
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Know Your High Pressyre Washer
Read this Owner*s Manual and Safety Rules before
operation of your High Pressure Washer Compare
this illustrailon with our pressure washer to familiarize
yourself with the location of various controls and
adjustments. Save this manual for future reference.
PUMP- Develops high pressure.
ENGINE OIL FILL" Place where engine oil is poured.
PRESSURE REGULATOR-
Allows you to adjust the
pressure of the outlet stream.
ENGINE RUN/STOP SWITCH- Sets engine in starting
mode for recoil starter —
Stops
running engine.
RECOIL STARTER-
Used for starting the engine
manually.
SPRAY GUN ASSEMBLY-
Controls the application of
water onto cleaning surface with trigger device.
PUMP OIL FILL-
Port where pump oil is poured and
breather cap is located.
GAS TANK/CAP-
Cap is removed and unleaded
gasoline is poured.
CHEMICAL INJECTION TUBE AND FILTER-
Mixes
water and detergent In outlet water flow.
HIGH PRESSURE OUTLET-
Connection for high pres
sure hose.
CHOKE-
Lever used for starting unit.
LEVER
CHEMICAL
ADJUSTMENT
KNOB