Craftsman 315.279940 - Manual (Page 5)

SYMBOLS
SYMBOL NAME DESIGNATION/EXPLANATION
V Volts Voltage
A Amperes Current
Hz Hertz
Frequency (cycles per second)
min Minutes Time
Alternating Current Type or a characteristic of current
Direct Current Type or a characteristic of current
'^0
No Load Speed Rotational speed, at no load
.../min Revolutions or Reciprocation Per Minute Revolutions, strokes,
surface speed, orbits etc, per minute
A
Safety Alert Symbol Indicates danger, warning or caution.
It means attention!!! Your safety is
involved.
FEATURES
DEFINITIONS
A) DANGER: Failure to obey a safety warning will result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal Injury.
B) WARNING: Failure to obey a safety warning can result in serious injury to yourself or to others.
Always follow the safety precautions to reduce the risk of fire, electric shock and personal injury.
C) CAUTION: Failure to obey a safety warning may result in property damage or personal injury
to yourself or to others. Always follow the safety precautions to reduce the risk of fire, electric
shock and personai injury,
D) NOTE: Advises you of information or instructions vital to the operation or maintenance of the
equipment.
A WARNING:
The operation of any drill can result in foreign objects being thrown into your eyes, which can result
in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety
glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety
Mask for use over eyeglasses or standard safety glasses with side shields, available at Sears Retail
Stores.