Specifications, Transmitter and receiver, Transmitter – Nikon ML-3 Modulite Remote Control Set User Manual
Page 33
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
SPECIFICATIONS
Transmitter and receiver
Modulation system Infrared communication
Approx, 8m (26.2 ft.)along the
optical axis
Approx, 6m (19.7 ft.) with a
light reception angle of 10°
Number of control
output channels Two channels available —
CHI, CH2
Shooting modes S for single-frame shooting
C for continuous shooting
DELAY for 3 sec. delayed
shooting
TEST for operation check in
A. TRIG mode
Operating temperature -20°C ~ 60°C (-4°F - 140°F)
Range (Single
frame shooting)
Transmitter
Continuous
standby time
Transmission
Number of output
channels
Shooting modes
Transmission button
Battery power check
Power source
Others
Dimensions
Weight (excluding
batteries)
Approx. 72 hours with in
A.TRIG mode (alkaline-
manganese battery)
Infrared rays
Three channels (CHI, CH2 and
A. TRIG)
S, C, DELAYTTEST
Lightly pressing the button
activates the camera’s
exposure meter and autofocus
operation; fully depressing the
button releases the shutter
With sufficient battery power,
monitor light comes on for a
moment
With weak battery power and
channel selector set to CHI or
CH2, monitor light blinks
Two AAA-type alkaline-
manganese or high-rate
manganese batteries
Tripod mounting socket (1/4
in.), wriststrap
117(W)x 22(H) x30(D)mm
4.6(W)
X
0.9(H) x1,2(D)in.
40g (1,4oz.)
34