Accessory shoe er – Nikon fe2 User Manual
Page 49
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
■ ■
Accessory Shoe er
Located at the top of the pentaprism viewfinder, the hot shoe
allows direct mounting of the Nikon Speedlight SB-15, SB-16B,
SB-18, SB-20 or any electronic flash with an ISO-type mounting
foot. Other flash units may be mounted with a flash unit coupler
(see the table on page 49). Four electrical contacts provide proper
synchronization of the flash unit #, automatic flash output stop
#, identification of a TTL flash unit #, and both ready-light
indication in the camera’s viewfinder (via an LED) and auto
switching to the proper sync speed of 1/250 sec. # with Nikon
dedicated flash units.
Caution: The use of other manufacturers' flash units, even v/ith the
same ISO-type mounting foot, may cause abnormalities to the 1C circuitry.
Units having a high voltage sync circuit may also cause damage in shutter
speed precision.
But, at 1/250 sec., all movement is stopped.
47