Nikon SB 20 User Manual
Page 67
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
flash terminal. Because the SB-22, SB-21 B, SB-20,
SB-18 and SB-15 are not provided with a TTL multiple
flash terminal, it is necessary to use TTL Remote Cord
SC-17 when using these flash units as a master flash
unit. To use the SB-22, SB-20, SB-18 and/or SB-15 as
slave flash units, use the AS-10. When using the
SB-140, SB-14 and/or SB-11 for TTL multiple flash
photography, you should also use TTL Remote Cord
SC-23. With the Nikon F-401/N4004, programmed TTL
auto flash and TTL auto flash are not possible with the
SB-11/14/140 (even with the SC-23) or SB-21. They
cannot be used for TTL multi-flash either, even as a
slave flash unit.
See the system chart on the next page.
43