Nikon fe User Manual
Page 27
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
When the shutter-speed dial is set to other than the
“AUTO"’ setting, manual shutter speed selection is
provided, with exposure determination via the “match-
needle" method. To determine the correct exposure
using manual speed selection, perform the following:
Switch on the meter by moving the advance lever to Its
stand-off position. Adjust the shutter-speed dial until the
green needle is aligned with the desired speed; then,
simply adjust the aperture setting of the lens until the
black needle moves to overlap the green needle. If de
liberate under- or overexposure is desired, adjust the
controls so that the green needle overlaps the next
higher number (one-stop underexposure) or the next
lower number (one-stop overexposure). Example under
and overexposure indications are shown at the right.
15
8
4
2
1
2
4
8
B
60
30
15
8
4
2
1
2
4
8
Deliberate
one-stop
underexposure
, . . and one-stop
overexposure.
26