Canon EOS 5 - Manual (Page 27)

1) Turn the comnnand dial to the “ SB ” posi­
tion.
• “OFF” is displayed in the LCD panel.
2) Turn the main dial to the desired calibra­
tion number.
• Numbers which do not yet contain cali­
bration settings blink in the display.
3) While holding the camera to your eye, look
at the blinking far right AF frame in the
viewfinder and press the shutter button.
• A double beep tone is heard.*
4) Next, look at the blinking far left AF frame
in the viewfinder and press the shutter
button again.
• A double beep tone is heard, and “End”
and the calibration number are dis­
played in the viewfinder and LCD panel
to indicate that the calibration proce­
dure is completed.
• If the calibration procedure is inter­
rupted for a short period and the red AF
frame in the viewfinder goes out, press
the shutter button halfway and start
again from step 3.
17