Dic operation and displays, Dic operation and displays -40 – Cadillac 2010 Escalade EXT User Manual

Page 220

Advertising
background image

All messages will appear in the DIC display located in
the center of the instrument panel cluster.

The DIC comes on when the ignition is on. After a short
delay, the DIC will display the information that was last
displayed before the engine was turned off.

See DIC Operation and Displays on page 4‑40 and
DIC Vehicle Customization on page 4‑56 for the
displays available.

DIC Operation and Displays

The DIC has different displays which can be accessed
by pressing the DIC buttons located on the instrument
panel, next to the steering wheel.

The DIC displays trip, fuel, and vehicle system
information, and warning messages if a system problem
is detected. A digital speedometer also appears at the
bottom of the DIC display. The digital speedometer can
be enabled or disabled. See “DISPLAY DIGITAL
SPEED” under DIC Vehicle Customization on
page 4‑56
for more information.

DIC Buttons

The buttons are the trip/
fuel, vehicle information,
customization, and set/
reset buttons. The button
functions are detailed in
the following pages.

3

(Trip/Fuel): Press this button to display

the odometer, trip odometer, fuel range, average
economy, fuel used, timer, transmission temperature,
instantaneous economy, and average vehicle speed.
The compass and outside air temperature will also be
shown in the display. The temperature will be shown in
°F or °C depending on the units selected.

T

(Vehicle Information): Press this button to display

the oil life, units, tire pressure readings for vehicles with
the Tire Pressure Monitor System (TPMS), Remote
Keyless Entry (RKE) transmitter programming, compass
zone setting, and compass recalibration.

4-40

Advertising