CREATIVE 1212M - Manual (Page 93)

7 - Appendix
Sync Daughter Card Supplement
E-MU Digital Audio System 93
7 - Appendix
Sync Daughter Card Supplement
SMPTE Conversion
Warning: SMPTE and
MTC do not provide
sample sync for digital
I/O. You must use Word
Clock, S/PDIF or ADAT
sync.
One of the main functions of the Sync Daughter Card is to convert SMPTE (LTC) to
MIDI Time Code (MTC) and vice-versa. The term “Host MTC” refers to MTC, which is
generated or used by the host application (Cubase, etc.). MTC is also available at the
MIDI jack on the back of the Sync Card.
SMPTE Options
When the Sync Daughter Card is installed in your system a SMPTE button in the
PatchMix DSP mixer becomes visible. Pressing the SMPTE button brings up the SMPTE
window.
SMPTE Features
• Conversion of SMPTE to MTC quarter-frame messages & full-frame messages.
Constant quarter-frame messages are generated with steady SMPTE data input.
Occasional MIDI full-frame messages are generated when SMPTE contains data dropouts.
• Conversion of MTC (quarter frame & full frame) messages from the host
computer to SMPTE out.
Simultaneous SMPTE and MTC output when receiving MTC from the host computer
• Outputs SMPTE and MTC striping data.
SMPTE Start Time and type can be set via System Settings dialog box.
SMPTE Frame
Rate Settings
SMPTE
Start Time
SMPTE Status/
Error Indicators
Start Striping
Stop
Striping
Output
Level
Flywheel
Amount
Flywheel Mode
• Off • Continuous
• Fixed •1-time Jam
Current Time
Output
Source
Word Clock
Termination