Code 3 Z3 Siren Installation & Operation Manual - Manual (Page 16)

16
Siren Section:
Input Voltage 10 to 16 VDC and ground - 12V units
(Note: Operation of 12V units above 15 VDC for an extended period of time may result in speaker damage.)
Operating Current 100W: 8 Amps @ 13.6V with 11-ohm load (100 Watt Speaker) - 12V units
200W: 14 Amps @ 13.6V with 5.5-ohm load (2-100 Watt Speakers) - 12V units
(NOTE: There is no 58 Watt speaker connection available.)
Standby Current Ignition On < 10mA
Ignition Off < 1mA
Cycle Rate Wail - 11 cycles/minute
Yelp - 200 cycles/minute
Voltage Output ~ 66 Vpp
Audio Section:
Audio Response 3 dB down points - 500 to 3000 Hz
1000 Hz, 0 dB reference
Warning Light Control: 3-Level Switch, 4 Outputs, 50 Amps maximum combined total
Level 1 & 2: 15 Amp Maximum Each Level
25 Amp Maximum Total
Green (1) & Yellow (2) LED Indication
Level 3A & 3B: 15 Amp Maximum Each Level
25 Amp Maximum Total
Red (3) LED Indication
AUX A thru D: 5 Amp Maximum Each Aux
20 Amp Maximum Total
AUX E thru H: 10 Amp Maximum Each Aux
30 Amp Maximum Total
ArrowStik: 8 Output (not internally fused), Ground Switching, 5A Per Output
DIM Output, +12VDC, 1.5A Internally Protected
System - Weight: Amplifi er 4.2 lbs (1.9 Kg)
Control Head & 1.1 lbs (0.5 Kg)
Microphone
Boxed Unit 9.5 lbs (4.3 Kg)
Size:
Amplifi er 9.750”L x 6.832”W x 3.936”H
Control Head 6.80”L x 3.30”H x 1.07”D (Switch will increase depth dimension to 1.95”D.)
Temperature: -22F thru +149F (-30C thru +65C) SAE Equipment Type EVS1