Dynojet 198: Dyno Drum Cover for Kart and ATV Dyno Motorcycle Option - Manual (Page 2)

Drum Cover Installation
This manual explains the installation procedure for the drum
cover. The drum cover is necessary for the Kart / ATV Dyno when
used in conjunction with Motorcycle Carriage Option.
Step 1
Place the Drum Cover on the top deck of the dyno. It should cover
the drum that it not used during motorcycle testing.
Step 2
Use a tape measure to center the Drum Cover. Measure the front
and rear of the cover to the front and rear of the dyno frame (A).
Also, measure from the drum face (on each side) to the edge of the
Drum Cover (B).
P/N 98230100 2
A
B