Elecraft KXPA100 Manual - Manual (Page 7)

7
In the Box
Check the shipping box for the following contents.
If you purchased your KXPA100 as a kit, refer to the Kit Assembly Manual included in
the box to assemble the kit.
KXPA100 Amplifier and ATU
You will find your KXPA100 amplifier in the box, unless you assembled the kit version. The KXAT100
antenna tuning unit, if included, will be inside the same enclosure as the KXPA100. The cover photograph on
this manual shows a KXPA100 amplifier with the optional KXAT100 antenna tuning unit installed. The bottom
row of controls and indicators for SWR, mode and ATU functions are present only if you purchased the
KXPA100 with the optional KXAT100 antenna tuning unit.
Carrying Handle
The KXPA100 has a strap handle on one side for ease in carrying the unit. When setting the unit down, place it
on its four feet with the handle on the side
Supplied with KXPA100
Serial Data Cable
Connects the KXPA100 to your personal computer to upload updated firmware and provide other functions (see
Utility Program, page 34 for details). A serial data cable that connects to your pc USB port is provided unless
you specified a cable for an RS232 connector. This cable is identical to and interchangeable with the serial
interface cable used with the KX3 transceiver.