Kontron CP346 - Manual (Page 46)

Installation CP346
Page 3 - 6 © 2005 Kontron Modular Computers GmbH ID 27253, Rev. 03
P R E L I M I N A R Y
The pinouts of the adapter’s 37-pin and 9-pin D-Sub connectors are shown in the Functional
Description chapter of this manual.
3.4.2.2 Null-Modem Cable
If operating in RS232 mode, a null-modem cable can be used in order to allow the use of a ter-
minal program. The null-modem cable is provided with a 9-pin female D-Sub connector on ei-
ther end, thus linking the adapter interface with the PC interface.
Note...
The port labelling on the 9-pin D-sub connectors is different to the channel
numbering on the CP346.
Channel 0 corresponds to Port 1
Channel 1 corresponds to Port 2
Channel 2 corresponds to Port 3
Channel 3 corresponds to Port 4
Channel 0
Channel 1
Channel 2
Channel 3
9-pin D-Sub 37-pin D-Sub
Connectors Connector
Port 1
Port 4
Port 3
Port 2
Figure 3-1: Four-Channel Front
Panel Adapter