Kontron JRexplus-DC - Manual (Page 52)

KTD-S0008-F Page 47 Setup Guide
JRexplus-DC User's Guide
22.5.2.4.1 Primary/Secondary/Third Master/Slave Submenu
Feature Option Description
Device Not Detected
Hard Disk
ATAPI CDROM
ARMD
Show the type of IDE drive
ARMD = ATAPI Removable Media Device
Vendor N / A Show the IDE drive manufacturer and drive name
Size N / A Display the calculated size of the drive
LBA Mode Supported
Not Supported
Show whether a disk uses LBA
Block Mode N / A Display the block size (in sectors) or 'Not Supported'
PIO Mode Not Supported,
0, 1, 2, 3, 4
Display the highest supported PIO mode
Async DMA Not Supported
SingleWord DMA0 - 2
MultiWord DMA0 - 2
Display the highest supported Async DMA mode
Ultra DMA Not Supported
Ultra DMA0 - 6 Display the highest supported Ultra DMA mode
S.M.A.R.T. Supported
Not Supported
Show whether a disk uses S.M.A.R.T. (Self Monitoring,
Analysis and Reporting Technology)
Type Not Installed, Auto
CD/DVD, ARMD
Define the type of the IDE drive
LBA/Large Mode Disabled
Auto
LBA causes Logical Block Addressing
Block (Multi-Sector
Transfer)
Disabled
Auto
Block mode enables multi-sector transfer and increase the
performance
PIO Mode Auto
0, 1, 2, 3, 4
Define the PIO mode if DMA not possible. Auto selects the
optimum transfer mode
DMA Mode Auto
SWDMA0 - 2
MWDMA0 - 2,
UDMA0 - 6
Define the Async or Ultra DMA mode. Auto selects the
optimum transfer mode
S.M.A.R.T. Auto
Disabled
Enabled
Show if the device is capable of using the error prede-
diction tool
32Bit Data Transfer Disabled
Enabled
Enable 32 bit communication between CPU and IDE
controller