Kontron Micro Client 3 104 User Manual
User guide
Advertising
This manual is related to the following products:
Table of contents
Document Outline
- 1. Table of Contents
- 2. Introduction
- 3. Important Instructions
- 4. General Safety Instructions for IT Equipment
- 5. Electromagnetic Compatibility
- 6. Scope of Delivery
- 7. Product Description
- 7.1. Front Side View
- 7.2. Bottom View
- 7.3. Optional Interfaces
- 7.4. Top View
- 7.5. Left and Right Side View
- 7.6. Rear View
- 7.7. Installed SBC
- 7.8. DC Power Connection
- 7.9. Accessing Internal Components
- 7.10. Getting started
- 7.11. Operating System and Hardware Component Drivers
- 7.12. MC 3/MC 3W System Mounting to a Subframe or Panel
- 8. Maintenance and Prevention
- 9. Technical Data
- 10. Standard Interfaces – Pin Assignments
- 10.1.1. Power Connector
- 10.1.2. Serial interface COM (RS232)
- 10.1.3. Serial Port (RS422/RS485) configured as RS422 (4-Channel Mode)
- 10.1.4. Serial Port (RS422/RS485) configured as RS485 (4-Wire Mode), full duplex, (Bus-Master)
- 10.1.5. Serial Port (RS422/RS485) configured as RS485 (2-Wire Mode), half duplex
- 10.1.6. CAN Connector
- 10.1.7. DP Connector (DisplayPort)
- 10.1.8. USB Port
- 11. Technical Support