Casio E-200 - Manual (Page 53)

53
3. Tap and hold the item, and tap Beam Item on the pop-up menu.
You can also send items, but not folders, from File Explorer. Tap and hold the item you
want to send, and then tap Beam File on the pop-up menu.
To receive information
1. Align the IR ports so that they are unobstructed and within a close range.
2. Have the owner of the other device send the information to you. Your device will automatically
receive it.
Connect to the Internet
You can connect to your ISP, and use the connection to send and receive e-mail messages and
view Web or WAP pages.
You can connect to the Internet in one of two ways:
• Create a modem connection. If this is the method you want to use, see “To create a modem
connection to an ISP.”
• Use an Ethernet card and a net tap to connect to the network. If this is the method you want to
use, see “To create an Ethernet connection to an ISP.”
To create a modem connection to an ISP:
1. Obtain the following information from your ISP: ISP dial-up access telephone number, user
name, password, and TCP/IP settings. Some ISPs require information in front of the user
name, such as MSN/username.
2. If your device does not have a built-in modem, install a modem card, or use a NULL modem
cable and appropriate adapters to connect an external modem to your Pocket PC through the
serial port.
3. Tap and then Settings. In the Connections tab, tap Connections. Under The Internet
settings, select Internet Settings and tap Modify.
4. In the Modem tab, tap New.
5. Enter a name for the connection, such as “ISP Connection.”
6. In the Select a modem list, select your modem type. If your modem type does not appear, try
re-inserting the modem card. If you are using an external modem that is connected to your
device with a cable, select Hayes Compatible on COM1.