Mercedes-Benz CLA-Class 2014 COMAND Manual - Manual (Page 71)

Starting route calculation
Address entry menu with destination address
:
Destination address
; Starts route calculation
You can have COMAND calculate a route to
the destination address, or you can save the
destination address (for example, as your
home address (My address)) (
Y
page 69).
X Call up the address entry menu
(
Y
page 64).
X
In the address entry menu, confirm Start Start
by pressing W.
If no other route has been calculated, route
calculation starts immediately (option 1). If
another route has already been calculated
(route guidance is active), a prompt
appears (option 2).
i The Continue Continue menu item is displayed
instead of Start Start if Calculate Alterna‐ Calculate Alterna‐
tive tive Routes Routes is activated in the navigation
menu (option 2) (
Y
page 93).
Option 1 – no route guidance active: route
calculation starts. While route calculation is in
progress, an arrow will indicate the direction
to your destination. Below this, you will see a
message, e.g. Calculating Fast Calculating Fast
Route... Route... .
Once the route has been calculated, route
guidance begins.
If the vehicle is not on a digitized road, the
following is displayed:
R the linear distance to the destination
R the direction to the destination
R
the Off Mapped Road Off Mapped Road message
Option 2 – route guidance is already
active: if route guidance is already active, a
prompt will appear asking whether you wish
to terminate the currently active route guid-
ance.
X
Select Yes Yes or No No and press W to confirm.
If you select Yes Yes , COMAND will stop route
guidance and start route calculation for the
new destination.
If you select
No No , COMAND will continue
with the active route guidance.
i Route calculation takes a certain amount
of time. The time depends on the distance
from the destination, for example.
COMAND calculates the route using the
digital map data.
The calculated route can differ from the
ideal route, for example because of incom-
plete map data. Please also refer to the
notes about the digital map (
Y
page 118).
Entering and saving your home address
You can either enter your home address for
the first time (option 1) or edit a previously
stored home address (option 2).
X Option 1: enter the address, e.g. a city,
street and house number (
Y
page 64).
X After entering the address in the address
entry menu, select Save Save by turning c V d
and Z V Æ sliding the COMAND controller
and press W to confirm.
X Select Save as "My Address" Save as "My Address" and press
W to confirm.
COMAND stores your home address as My My
Address Address in the destination memory.
X
Option 2: proceed as described under
"Option 1".
A prompt appears asking whether the cur-
rent home address should be overwritten.
X Select Yes Yes and press W to confirm.
After selecting Yes Yes , the Data Data saved. saved. mes-
sage appears.
Destination entry
69
Navigation
Z