Mercedes-Benz S-Sedan 2015 Owners Manual - Manual (Page 268)

X Press the : or 9 button to set Off Off ,
Standard Standard or Sensitive Sensitive .
X Press the a button to confirm the selec-
tion.
When ATTENTION ASSIST is deactivated, the
é symbol appears in the Assistance Assistance
Graphic Graphic menu in the multifunction display
when the ignition is on.
For further information about ATTENTION
ASSIST, see (
Y
page 236).
Activating/deactivating Active Lane
Keeping Assist
X Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X Confirm by pressing a on the steering
wheel.
X
Use : or 9 to select the DriveAs‐ DriveAs‐
sist sist submenu.
X
Press a to confirm.
X
Press the : or 9 button to select
Lane Keeping Assist Lane Keeping Assist .
X Press a to confirm.
The current selection Standard Standard or Adap‐ Adap‐
tive tive is displayed.
X To change the setting: press a again.
For further information about Active Lane
Keeping Assist, see (
Y
page 245).
Head-up display menu
Switching other displays on/off
This function is only available if the vehicle is
fitted with Navigation and/or Traffic Sign
Assist.
In the on-board computer, you can select
which contents are shown on the windshield
when the head-up display is activated
(
Y
page 253).
X Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X Confirm by pressing a on the steering
wheel.
X
Press the : or 9 button to select the
Head-up Display Head-up Display submenu.
X
Press a to confirm.
X
Press the : or 9 buttons to select
Display Content Display Content .
X Press a to confirm.
Switching the navigation messages dis-
play on/off
X
Press the a button to save the setting.
When you switch on the Navigation Navigation Mes‐ Mes‐
sages sages display, navigation messages are
shown on the windshield when the head-up
display is activated.
For more information on navigation, see the
separate operating instructions.
Setting the position
You can adjust the position of the head-up
display. This allows you to compensate for
differences in the seat position.
X
Switch on the Head-up display
(
Y
page 253).
X Use ò on the steering wheel to call up
the list of menus.
X
Press the : or 9 button on the steer-
ing wheel to select the Settings Settings menu.
X
Confirm by pressing a on the steering
wheel.
X
Use the : or 9 button to select the
Head-up Display Head-up Display submenu.
X
Press a to confirm.
X
Use the : or 9 button to select the
Position Position function.
X Press the a button to save the setting.
266
Menus and submenus
On-board
comput
er
and
display
s