Mercedes-Benz G-Class 2014 Owners Manual - Manual (Page 115)

X Unscrew screws ;.
X Swing protection grille : to the right.
X After changing the bulbs, swing protection
grille : to the left.
X
Tighten screws ;.
Tail lamp
!
When installing the lens, make sure that
the seal is positioned correctly.
! Do not fasten the screws too tightly. You
could otherwise damage the lens.
X
Switch off the lights.
X Unscrew screws :.
X Remove lens ;.
= Turn signal
? Brake/tail lamp
A Tail lamp/standing lamp
X Turn the corresponding bulb counter-
clockwise, applying slight pressure, and
remove it from the bulb holder.
X Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
X Install lens ;.
X Replace and tighten screws :.
X AMG vehicles: secure the protection grille
(
Y
page 112).
Backup lamp/rear fog lamp
!
Do not fasten the screws too tightly. You
could otherwise damage the lens.
Example: rear fog lamp
X Switch off the lights.
X Unscrew screws ;.
X Remove lens :.
X Turn bulb = anti-clockwise, applying slight
pressure, and remove it from the bulb
holder.
X
Insert the new bulb into the bulb holder and
turn it clockwise until it engages.
Replacing bulbs
113
Lights
and
windshield
wipers
Z