Mercedes-Benz CLS-Class 2013 Owners Manual - Manual (Page 102)

Removing and installing the rear seat
head restraints
G WARNING
Occupants should only travel sitting on seats
which have the head restraints installed. This
reduces the risk of injury to occupants in the
event of an accident.
! Make sure that the rear window roller
sunblind has been retracted before the rear
head restraints are removed. You could
otherwise damage the roller sunblind.
X To remove: pull the head restraint up to
the stop.
X Press release catch : and pull the head
restraint out of the guides.
X To re-install: insert the head restraint so
that the notches on the bar are on the left
when viewed in the direction of travel.
X Push the head restraint down until you hear
it engage in position.
Adjusting the multicontour seat
The multicontour seat function is only
available on vehicles for Canada.
: To adjust the thigh cushion
; To adjust the backrest contour in the
lumbar region
=
To adjust the backrest contour in the
upper back region
? To adjust the side bolsters of the seat
backrest
You can adjust the contour of the front seats
individually so as to provide optimum support
for your back and sides.
X Make sure that the SmartKey is in position
2 in the ignition lock.
Adjusting the active multicontour
seat
Overview
: To adjust the seat cushion length
; To switch the dynamic function on or off
=
To adjust the side bolsters of the seat
backrest
? To switch the massage function on or off
100
Seats
Seats, steering wheel and mirrors