Mercedes-Benz SL-Class 2013 Owners Manual - Manual (Page 235)

Selecting the permanent display function
You can determine whether the multifunction
display permanently shows your speed or the
outside temperature.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Instr. Cluster submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Permanent Display function.
You will see the selected setting: Outside
Temperature or Speedometer .
X Press the a button to save the setting.
i Speed is displayed in mph.
Lights
Setting the daytime running lamps
i This function is not available in Canada.
X Press the = or ; button on the
steering wheel to select the Settings .
X
Press the : or 9 button to select the
Lights submenu.
X Press a to confirm.
X
Press the : or 9 button to select
Daytime Running Lights function.
If the Daytime Running Lights function
has been switched on, the cone of light and
the W symbol in the multifunction
display are shown in red.
X Press the a button to save the setting.
Further information on daytime running
lamps (
Y
page 126).
Switching Adaptive Highbeam Assist on/
off
X Press the = or ; button on the
steering wheel to select the Settings
menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Adaptive Highbeam function.
If the Adaptive Highbeam function has
been switched on, the cone of light and the
_ symbol in the upper multifunction
display are shown in red.
X Press the a button to save the setting.
When Adaptive Highbeam Assist is activated,
the _ symbol appears in the lower
multifunction display.
For further information about Adaptive
Highbeam Assist, see (
Y
page 131).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the
steering wheel to select the Sett. menu.
X Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-. function.
You will see the selected setting.
X Press the a button to confirm.
X Press the : or 9 button to adjust the
brightness to any level from Off to Level
5 (bright).
X
Press the a or % button to save the
setting.
Setting the ambient lighting color
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Lights submenu.
X Press the a button to confirm.
X Press the : or 9 button to select the
Ambient Light Color function.
X
Press the a button to confirm.
Menus and submenus
233
On-board
computer
and
displays
Z