Mercedes-Benz SLK-Class 2013 Owners Manual - Manual (Page 205)

Service menu
In the Serv. menu, you have the following
options:
R calling up display messages (
Y
page 211)
R restarting the tire pressure loss warning
system (
Y
page 315)
R checking tire pressure electronically
(
Y
page 316)
R calling up a service due date
(
Y
page 280)
Settings menu
Introduction
In the Sett. menu, you have the following
options:
R change the instrument cluster settings
(
Y
page 203)
R change the light settings (
Y
page 204)
R change the vehicle settings (
Y
page 206)
R change the convenience settings
(
Y
page 206)
R restore the factory settings (
Y
page 203)
Restoring the factory settings
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Factory Setting submenu.
X Press a to confirm.
The Reset All Settings? message
appears.
X
Press the : or 9 button to select
No or Yes .
X Press the a button to confirm the
selection.
If you have selected Yes , the multifunction
display shows a confirmation message.
For safety reasons, the Daytime Running
Lights: function in the Lights submenu is
only reset if the vehicle is stationary.
Instrument cluster
Selecting the unit of measurement for
distance
You can determine whether the multifunction
display shows some messages in miles or
kilometers.
X Press the = or ; button on the
steering wheel to select the Sett. menu.
X
Press the : or 9 button to select the
Instr. Cluster submenu.
X Press a to confirm.
X
Press the : or 9 button to select the
Display Unit Speed-/Odometer:
function.
You will see the selected setting: km or
miles .
X Press the a button to save the setting.
The selected unit of measurement for
distance applies to:
R the digital speedometer in the Trip menu
R odometer and the trip odometer
R trip computer
R current consumption and the range
R the navigation instructions in the Navi
menu
R cruise control
R DISTRONIC PLUS
R ASSYST PLUS service interval display
Menus and submenus
203
On-board
computer
and
displays
Z