Interior care, Maintenance and care, Care – Mercedes-Benz G-Class 2011 Owners Manual User Manual

Page 226

Advertising
background image

graphite coating could be damaged. This
could cause wiper noise.

X

Fold the wiper arms away from the
windshield.

X

Carefully clean the wiper blades with a
damp cloth.

X

Fold the windshield wipers back again
before switching on the ignition.

!

Hold the wiper arm securely when folding

back. The windshield could be damaged if
the wiper arm smacks against it suddenly.

Cleaning the headlamps

X

Clean the plastic lamp lenses on the
headlamps using a wet sponge and a mild
cleaning agent, e.g. Mercedes-Benz car
shampoo or cleaning cloths.

!

Only use cleaning agents or cleaning

cloths which are suitable for plastic
headlamp lenses. Unsuitable cleaning
agents or cleaning cloths could scratch or
damage the plastic headlamp lenses.

Cleaning the sensors

X

Clean sensors : of the driving systems
with water, car shampoo and a soft cloth.

!

When cleaning the sensors with a power

washer, maintain a distance between the
vehicle and the nozzle of the power washer
of at least 11.8 in (30 cm). Information
about the correct distance is available from
the equipment manufacturer.

Cleaning the rear view camera

X

Use clear water and a soft cloth to clean
camera lens :.

!

Do not clean the camera lens and the area

around the rear view camera with a power
washer.

Cleaning chrome parts

Impurities combined with the effects of road
grit and corrosive environmental factors may
cause flash rust to form on the surface. You
can restore the original shine of the chrome
parts by cleaning them regularly, especially in
winter and after washing.

!

Do not clean chrome parts e.g. the

exhaust tail pipes (G 55 AMG) or stainless-
steel spare hub cap with alkaline-based
cleaning agents such as wheel cleaner.

X

Clean the chrome parts with a chrome care
product tested and approved by Mercedes-
Benz.

Interior care

Cleaning the display

X

Before cleaning the display, make sure that
it is switched off and has cooled down.

X

Clean the display surface using a
commercially available microfiber cloth
and TFT/LCD display cleaner.

X

Dry the display surface using a dry
microfiber cloth.

!

For cleaning, do not use any of the

following:

R

alcohol-based thinner or gasoline

R

abrasive cleaning agents

R

commercially-available household
cleaning agents

These may damage the display surface. Do
not put pressure on the display surface
when cleaning. This could lead to
irreparable damage to the display.

224

Care

Maintenance and care

Advertising