Replacing wiper blades, Safety notes, Placing wiper arms in vertical position – Mercedes-Benz GLK-Class 2010 Owners Manual User Manual

Page 312: Practical hints

Advertising
background image

X

Insert the new bulb into the bulb carrier and
turn the bulb clockwise.

X

Insert the bulb carrier and press it in.
The bulb carrier retainers ; engage
audibly.

X

Reconnect the plug.

X

Close the side trim panel (

Y

page 309).

License plate lamps

X

Press tab ; of license plate lamp : in
direction of the arrow and loosen the lens
of license plate lamp :.

X

Remove the lens of license plate lamp :.

X

Replace the bulb.

X

Insert the lens of license plate lamp : and
press it in until engages audibly.

Replacing wiper blades

Safety notes

G

Warning!

For safety reasons, switch off the wipers and
remove the SmartKey from the starter switch
(vehicles with KEYLESS-GO: Make sure the
vehicle’s on-board electronics have status

0)

before replacing a wiper blade. Otherwise, the
wiper motor could suddenly turn on and cause
injury.

G

Warning!

Wiper blades are components that are subject
to wear and tear. Replace the wiper blades

twice a year, preferably in the spring and fall.
Otherwise the windows will not be wiped
properly. As a result, you may not be able to
observe surrounding traffic conditions and
could cause an accident.

!

To avoid damage to the hood, the front

wiper arms should only be folded forward
when in the vertical position.

!

Never open the hood when a front wiper

arm is folded forward.
Hold on to the wiper when folding a wiper
arm back. If released, the force of the
impact from the tensioning spring could
crack the windshield or the rear window.
Do not allow a wiper arm to contact the
windshield glass or the rear window
without a wiper blade inserted.
Mercedes-Benz recommends that you have
this work carried out at an authorized
Mercedes-Benz Center.

Placing wiper arms in vertical position

Wiper arms in vertical position

X

Make sure the hood is fully closed.

Vehicles with SmartKey

X

Turn the SmartKey in the starter switch to
position

1.

X

Turn the combination switch to wiper
setting °.

310

Replacing wiper blades

Practical hints

X204_AKB; 3; 23, en-US
d2ureepe,

Version: 2.11.8.1

2009-07-16T19:16:58+02:00 - Seite 310

Advertising