Mercedes-Benz E-Coupe 2010 Owners Manual - Manual (Page 123)

messages that may be stored in the system.
Such messages appear in the multifunction
display and are based on conditions or
system status the vehicle’s system has
recorded.
G Warning!
Malfunction and warning messages are only
indicated for certain systems and are
intentionally not very detailed. The
malfunction and warning messages are
simply a reminder with respect to the
operation of certain systems. They do not
replace the owner’s and/or driver’s
responsibility to maintain the vehicle’s
operating safety. Have all required
maintenance and safety checks performed on
the vehicle. Bring the vehicle to an authorized
Mercedes-Benz Center to address the
malfunction and warning messages.
X Press button = or ; to select the
Serv. menu.
If conditions have occurred causing status
messages to be recorded, the number of
messages appears in the multifunction
display:
X Press button : or 9 to select the
messages function.
X Press button a to confirm.
The stored messages will now be displayed
in the order in which they have occurred.
For malfunction and warning messages,
see “Vehicle status messages in the
multifunction display” (
Y page 232).
X Use button : or 9 to scroll through
the messages.
If you turn the SmartKey in the starter switch
to position
0 and then back to position 2, all
messages will be deleted from the message
memory.
Settings menu
Introduction
In the Sett. menu there are two functions:
The function Factory Setting
( Y page 121), with which you can reset the
settings to the original factory settings and a
collection of submenus (
Y page 122) with
which you can make individual settings for
your vehicle.
Resetting to factory settings
You can reset most of the settings of the
submenus to the factory settings.
For safety reasons, the function
Daytime
Running Lamps in the Lights submenu
cannot be reset while driving.
X Press button = or ; to select the
Sett. menu.
X Press button : or 9 to select the
Factory Setting function.
X Press button a.
The function
Reset All Settings?
appears in the multifunction display.
X Press button : or 9 to select Yes or
No. Select Yes if you want to reset to
factory settings.
X Press button a to confirm.
The confirmation message appears in the
multifunction display.
Control system
121
Controls in detail
207_AKB; 2; 35, en-US
d2ureepe,
Version: 2.11.8.1
2009-07-17T07:10:21+02:00 - Seite 121
Z