Operation – Mercedes-Benz CL-Class 2009 User Manual

Page 441

Advertising
background image

Tires and wheels

439

Your vehicle has also been equipped with a
TPMS malfunction indicator to indicate
when the system is not operating properly.
The TPMS malfunction indicator is
combined with the low tire pressure
telltale. When the system detects a
malfunction, the telltale will flash for
approximately 1 minute and then remain
continuously illuminated. This sequence
will continue upon subsequent vehicle
start-ups as long as the malfunction exists.
When the malfunction indicator is
illuminated, the system may not be able to
detect or signal low tire pressure as
intended.
TPMS malfunctions may occur for a variety
of reasons, including the installation of
replacement or alternate tires or wheels on
the vehicle that prevent the TPMS from
functioning properly. Always check the
TPMS malfunction telltale after replacing
one or more tires or wheels on your vehicle
to ensure that the replacement or alternate
tires and wheels allow the TPMS to
continue to function properly.

i

USA only:

If a condition causing the TPMS to
malfunction develops, it may take up to

10 minutes for the system to signal a
malfunction using the TPMS telltale
flashing and illumination sequence.
The telltale extinguishes after a few
minutes driving if the malfunction has been
corrected.

Tire pressure inquiries are made using the
multifunction display. The current tire
inflation pressure for each tire appears in the
multifunction display after a few minutes of
driving.

i

Possible differences between the

readings of a tire pressure gauge of an air
hose, e.g. gas station equipment, and the
vehicle’s control system can occur. The tire
pressure displayed by the control system
apply to sea level. In high-altitude
locations, the reading on a tire pressure
gauge will be higher than the reading issued
by the vehicle’s control system. Do not
reduce the tire inflation pressure under
such circumstances.

X

Switch on the ignition.

X

Press button

(

or

&

on the

multifunction steering wheel to select the

Service menu (

Y

page 245).

X

Press button

$

or

%

to select Tire

Press..

X

Press button

#

.

The current inflation pressure for each tire
appears in the multifunction display.

When the vehicle has been parked for longer
than 20 minutes, the message Tire

Pressure Displayed After Driving A

Few Minutes appears in the multifunction
display.

i

With a spare wheel mounted, the system

may still indicate the tire inflation pressure
of the removed road wheel for some
minutes. If this happens, keep in mind that
the indicated value where the spare wheel
is mounted does not reflect the actual
spare tire inflation pressure.

i

Operating radio transmission equipment

(e.g. wireless headsets, two-way radios) in

Operation

Z

Advertising