Mercedes-Benz SL-Class 2007 COMAND Manual User Manual
Page 78
76
Audio
DVD operation
ț
From time to time, clean your DVDs
with a commercially available cleaning
cloth. Never wipe circularly, but in a
straight line from inside to outside.
ț
After use, put your DVDs into the DVD
box.
ț
Protect your DVDs from high
temperatures and direct sunlight.
̈
Load a video DVD into the COMAND
(
୴
page 77).
or
̈
If a DVD is already loaded, open the Au-
dio menu (
୴
page 42) and press the
DVD
soft key.
If the video DVD meets the playback re-
quirements, playback will begin. If avai-
lable, the DVD menu (
୴
page 82) saved
on the DVD will appear.
DVD playback requirements
i
Vendors may offer DVDs which do not
comply with the standards.
Sound, picture and other playback
problems may occur when you play
such DVDs.
The COMAND can playback video
DVDs meeting the following
requirements:
ț
Regional code is set (factory
setting)
ț
NTSC or PAL TV standard
The appropriate information is usually
given either on the DVD or the DVD
box. The factory setting of the
COMAND is regional code 1. The
setting can be changed at an
authorized Mercedes-Benz Center. This
will allow you to playback video DVDs
with other regional codes, as long as
they comply with the NTSC or PAL TV
standard.
i
The COMAND system is capable of
playing DVDs. However, in order to
avoid driver distraction, the video
function is disabled and no images will
be shown on the COMAND screen.
Switching to DVD operation