Mercedes-Benz CL-Class 2004 Owners Manual - Manual (Page 340)

339
Practical hints
Replacing bulbs
̈ Insert the new bulb so that the base lo-
cates in the recess on the holder.
̈ From below, press connector 2 with
bulb upward onto the reflector.
̈ Align housing cover 1 and click into
place.
Front turn signal bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 260).
̈ Twist bulb socket 4 counterclockwise
and pull out.
̈ Gently push bulb into socket, turn
counterclockwise and remove.
̈ Insert new bulb in socket, push in and
twist clockwise.
̈ Reinsert bulb socket in lamp and twist
clockwise.
Parking and standing lamp bulb
̈ Switch off the lights.
̈ Open the hood ( ୴ page 260).
̈ Press ends of housing cover 1 tab to-
gether and remove cover.
̈ Pull out the bulb socket with the bulb.
̈ Pull the bulb out of the bulb socket.
̈ Insert a new bulb in the socket.
̈ Reinstall the bulb socket.
̈ Align housing cover and click into
place.
Side marker lamp bulb
̈ Switch off the lights.
̈ Carefully slide lamp towards rear.
̈ Remove front end first.
̈ Twist bulb socket counterclockwise
and pull out.
̈ Pull bulb out of the bulb socket.
̈ Insert new bulb in socket.
̈ Reinstall bulb socket, push in and twist
clockwise.
̈ To reinstall lamp, set rear end in
bumper and let front end snap into
place.