Miller Solo 100 Tripods - Manual (Page 5)

5
Fig 6 Spread Position
Mid Position
Note: This refers to the mid leg
angle position, not necessarily the
height of the tripod.
The SOLO RAPID LOCK tripod has three
leg angle positions. The middle leg angle
position (Fig.7) is self-engaging after
closing leg from fully spread position
(Fig.6). The mid position is chosen for
optimum stability in the 50-130cm tripod
height range, but is not recommended if
the tripod is being used in a crowded
situation, due to the
wide diameter, or
footprint spread, of the
extended tripod.
1 Remove camera from fluid head.
2 Close the tripod legs so all are pointing
straight down and disengage all
concentric locks.
3 Holding the bowl, lower tripod to its
shortest length and re-engage
concentric locks.
4 Close legs together fully (Fig. 1) fit leg strap and return tripod to
carry bag if finished shooting.
Tripod Setup (cont) Tripod Pull Down
Fig 5 Leg angle adjuster
raised
Fig 7 Middle leg
angle position