Pizzacraft PM6000 Pizzeria Pronto Outdoor Pizza Oven User Manual
Page 7
Advertising
7
1.
Attach legs to body as shown and slide into place; secure with M6x8 Phillips screws. Tighten screws
by hand.
2.
Insert gas inlet assembly into body as shown. Secure control valve with 2 supplied screws to body
front then secure pipe support with the third M4x5 Phillips screw. Attach control knob by aligning the
keyway and pushing onto valve spindle. Connect starter wire from valve assembly to starter plug
by fi rmly pushing it into place. TEST and CONFIRM that starter is providing an interior spark.
*Flip over to test and conFiRm that starter is providing an inte-
rior spark to burner tube.
Interior
Spark
Advertising