Reliance Controls THP216 - Manual

Door Knob & Cable Alarm
Model Number: THP216
Product Description
The product is intended to assist in protecting personal belongings and property, and to act as an early warning alarm for
emergency situations or unwanted entry into a doorway. The THP216 uses high performance 3D-DVSS (Three Dimension
Digital Vibration Sensor System) to detect the slightest vibration. Upon this vibration, a loud 100 decibel alarm will sound
instantly and last for 30 seconds. The alarm will also be activated by pulling or cutting the Cable Lock or by removing the
battery compartment.
THP216 Alarm Features
• 100 dB alarm
• No installation necessary
• Compact size, easy to carry
• Detachable Cable Lock allows hanging on door knob, or fastening to property such as a bicycle or briefcase.
• Panic button for instant alarm during emergency
• Vibration Sensor option can be turned off
• Battery Low indicator
• Button cell batteries included
IMPORTANT - Read and thoroughly understand the instructions and warranty prior to
using this alarm. Before using this alarm, it should be tested to ensure it functions
properly.
THP216 Alarm Components
1. Panic Button
2. Password keypad buttons
3. Vibration Sensor ON / OFF switch
4. LED light
5. Cable Lock
6. Battery Compartment
Low Battery Indicator
The THP216 Alarm can only detect a low battery when it is ARMED. When a low battery is detected, the unit will
sound a short beep every 10 seconds indicating it is time to replace the batteries immediately.
FRONT VIEW REAR VIEW