Rice Lake RL550 Digital Chair Scale Technical and Operating Instructions - Manual (Page 7)

Rice Lake 550 Digital Chair Scale - Scale Assembly 3
3.0 Scale Assembly
3.1 Unpacking Your Scale
Place the unopened box in an open area that has ample room for unpacking the scale.
Parts contained in the shipping box include:
• The chair scale
• This manual
• Box labeled
Parts Inside
• The
Parts Inside
box contains the following:
• Serial communication cable
• 6 AA batteries
• 5 mm Allen key
• 4 M6 x 16 Allen screws (to attach seat to base)
3.2 Save Packaging
If the Rice Lake 550 Digital Chair Scale must be returned for any reason, it must be properly packed with
sufficient packing materials in the original carton.
Note
Damage caused by improper packaging is not covered by the warranty.
3.3 Setting Up Your Scale
Use the following steps to set up the Rice Lake 550 Digital Chair Scale.
Move the box into an area where the scale can be assembled. It’s recommended that the scale be placed on a hard,
level surface for the most accurate weighments.
1. Locate the operator’s manual from inside the box and set it aside as it will provide instructions on the
proper scale removal and set up.
Figure 3-1. Chair Scale Packaging Once Out of the Box
2. Locate and remove the “
Parts Inside
” box and locate the 5 mm Allen key.