Rice Lake SURVIVOR 420HE Hostile Environment - Installation Manual - Manual (Page 21)

420HE Installation Manual - Configuration 17
3.2.2 Format Menu
XXXXXXX XXXXXXX XXXXXXX XXXXXXX
DSPDIV MULT UNITS DECPNT
0.453592 5D
2D
1D number
PRIMAR SECNDR
6SEC
4SEC
3SEC
2.5SEC
2SEC
1.5SEC
750MS
500MS
250MS
8SEC
DSPRAT
DSPDIV UNITS DECPNT
KG 888880
888888 1D
5D
2D
LB
88888. 8
8888.88
888.888
88.8888
8.88888 888880
888888
88888.8
8888.88
888.888
88.8888
8.88888
T
TN
NONE
TN
KG
T
LB
ALGOUT DIGI N SETPNT PROGRM PFORMT SERIAL CALIBR CONFIG FORMAT
1SEC
VERS
OZ
OZ
G
G
NONE
Only used if
UNITS =NONE
Figure 3-6. Format Menu
DFTHRH NONE
2DD
5DD
10DD
20DD
50DD
100DD
200DD
250DD Digital filter cutout threshold. Specifies the filter threshold, in display divisions. When a
specified number of consecutive scale readings (DFSENS parameter) fall outside of this
threshold, digital filtering is suspended. If NONE is selected, the filter is always enabled.
TAREFN
BOTH
NOTARE
PBTARE
KEYED
Tare function. Enables or disables push-button and keyed tares. Possible values are:
BOTH:Both push-button and keyed tares are enabled
NOTARE:No tare allowed (gross mode only)
PBTARE:Push-button tares enabled
KEYED:Keyed tare enabled
CONFIG Menu
Parameter Choices Description
Table 3-2. Configuration Menu Parameters (Continued)
FORMAT Menu
Parameter Choices Description
Level 2 submenus
PRIMAR DECPNT
DSPDIV
UNITS Specifies the decimal position, display divisions, and units used for the primary units. See
Level 3 submenu parameter descriptions.
SECNDR DECPNT
DSPDIV
UNITS
MULT Specifies the decimal position, display divisions, units, and conversion multiplier used for the
secondary units. See Level 3 submenu parameter descriptions.
Table 3-3. Format Menu Parameters