Vintage Cellars WineKoolR Slimline 800 - Manual (Page 18)

WALL
G
G
H
I
DRILL USING 1/4” (6 - 6.5 mm) DRILL BIT AND TAP IN ANCHORS
PRESS IN FULLY WALL TIES INTO REAR CONNECTOR PLATES AND SCREW IN SCREWS
H
I
BRACE TO WALL - for 400 models ONLY
WALL MATERIALS VARY, USE APPROPRIATE ANCHORS FOR YOUR APPLICATION.
15
TO AVOID INJURY OR DAMAGE ALWAYS BRACE TO WALL !
RISK OF INJURY !
IF CABINET IS NOT FULLY LOADED IN THE BOTTOM IT CAN BE TOP HEAVY.
DO NOT
PRESS IN FULLY
!
~ 18 ~
NEVER MOVE LOADED CABINET!
EMPTY FIRST!