Receiving & inspecting the system – Vintage Cellars Platinum Split Fully Ducted 4000WC User Manual

Page 7

Advertising
background image

www.whisperkool.com | Page 5

Receiving and Inspecting the System

Lift only at the designated hand hold locations on the shipping container or fully support the unit from

underneath. A shipment may include one or more boxes containing accessories.

Before opening the container, inspect the packaging for any obvious signs of damage or mishandling.

Write any discrepancy or visual damage on the Bill of Lading before signing.

Allow the condensing unit to sit for 24 hours prior to start up. The condensing unit can be placed in the

installation location, piped and evacuated during this time.

Note: WhisperKOOL units are manufactured in the USA and tested prior to shipment.

RECEIVING & INSPECTING THE SYSTEM

Review the Packing Slip to Verify Contents

Check the model number to ensure it is correct.

Check that all factory options ordered are listed.

If any items listed on the packing slip do not match your order information,

contact WhisperKOOL Customer Service immediately.

Check the Box for the following contents:

Please leave the unit in its original box until you are ready for installation. This will allow you to move the product

safely without damaging it. When you are ready to remove the product from the box, refer to the installation

instructions.

TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.

(1) Filter Grille

(1) Duct Plenum

Wall-Mount Accessory Kit

Ducted Accessory Kit

(1) Platinum Split Tech Manual

(1) Platinum Split Owners Manual

(1) Split System Warranty Checklist

(1) 12 ft. Bottle Probe

(10) 6-32 3/8” Phillips Pan Head Screw

(1) Display Adapter

(1) Platinum Split Tech Manual

(1) Platinum Split Owners Manual

(1) Split System Warranty Checklist

(1) 50 ft. Bottle Probe

(1) Remote Keypad

(1) 50 ft. Keypad Communication Cable

(1) Platinum Split Evaporator Unit

(Fan Coil Unit)

(1) Condensing Unit

(1) Installation Kit which includes:

(2) ½” 90° Barb fittings

(1) ½” barb tee

(1) 10 ft. 1/2” Drain Line

(4) 1 ¾” hex head screws

(1) Bypass plug

(2) Cable tie mounts and cable ties

(1) Black Strain relief

(1) 1/4” sight glass

(1) 1/4” filter drier

Main Evaporator Box

Main Condensing Unit Box

°

F

°

F

Advertising