Vintage Cellars WhisperKOOL InCellar - Manual (Page 21)

www.whisperkool.com | Page 19
Building a Facade
The InCellar Cooling Unit is set up to have a variety of Ducting Installation Options. The exhaust may be ducted into
the attic or out to the exterior of the house through the attic. The first option to consider is using a standard 6”x14”
Duct Boot and 8” diameter duct work for the exhaust followed by building a facade around the duct work.
Measure the space between the
cooling unit and the wall and add
the distance to these dimensions for
the total length.
Figure 5 below is an example that may be followed to create a facade to extend to the Ceiling using: 1/2” Plywood,
1/2” Drywall (2) 2x2, (2) 3x3.
INSTALLING THE DUCT WORK
“
“
“
“ “
FIGURE 5